INSTALLATION PA POWER AMPLIFIERS
APA-480
600
WATTS
Installation PA Power
Amplifier
- 1x Line 200mV unbalanced input and 2xLine 1V balanced
inputs through XLR connector, one 1V input having priority over all other
inputs.
- 100V input is provided for connecting another
amplifier’s output in long line applications.
- Ground lift switch provided at rear panel which helps
reducing the hum that occures due to multiple ground loops in the
installations.
- Resettable circuit breaker for protection against
overload and short circuit.
- Loop through output for connecting another booster
amplifier.
- 19” Rack mountable chassis.
- Instant
transfer to DC power (Car Battery) if AC power fails.
Power Output |
750W Max., 600W RMS at 10% THD, 550W RMS at 5% THD, 500W RMS
at 2% THD, 480W RMS at 1% THD |
Output Regulation |
≤ 2 dB, no load to full load at 1kHz |
Input Channels |
1 × 200mV/470kΩ (unbal.), 2 × 1V/50kΩ (bal.), 1 × 100V
Input/50kΩ |
Frequency Response |
50-15,000Hz ±3dB |
Signal to Noise Ratio |
60dB |
Tone Controls |
Bass: ±10dB at 100Hz, Treble: ±10dB at 10kHz |
Outputs |
Loop through 1 × 200mV/600W, 2 ×1V/1kW |
Speaker Outputs |
4Ω, 8Ω, 70V & 100V |
Power Supply |
DC: 24V (2×12V Car Battery) AC: 220-240V 50/60Hz |
Power Consumption |
DC: 15A AC: 1200VA |
Dimensions |
W485 × H142 × D510 mm |
Weight |
32.20kg |